Description
Penetrates deep to seal and protect masonry against acids, alkalis, household cleaners, gasoline, oil and salt.Drylok® Masonry Waterproofer, 1 gal, Clear, High Gloss
Features:
* DRYLOK Clear Masonry Waterproofer is the first non-pigmented masonry waterproofer specifically formulated for use on bare masonry floor and wall surfaces
* This Patent Pending Technology provides a durable, waterproof, easy to clean, non-yellowing high gloss finish
* DRYLOK Clear Masonry Waterproofer incorporates ISP CleanGuard®, environmentally safe green biocides, to resist the growth of mildew on the dry paint film
* DRYLOK Clear Masonry Waterproofer has been tested in accordance to requirements of ASTM D-788 Resistance to Hydrostatic Pressure at 4 P.S.I
* and ASTM D-694 Resistance to Wind Driven Rain of 98 mph Stops Hydrostatic Pressure Standard/Approvals: ASTM D788, ASTM D694 Application: Interior and Exterior Concrete Floors, Poured Concrete Walls, Split-faced Block, Concrete and Cinder Block, Stone, Brick, Stucco and Pre-cast Decorative Items
Specifications:
Resists: Wind Driven Rain and High Abrasion | Application Method: Spray and Brush | Nominal Capacity: 1 gal | Temperature Range: 50 deg F Application | Color: Clear | Drying Time: 2 hr to Touch, 4 hr to Recoat, 4 hr Light Foot Traffic and 24 hr Heavy Foot Traffic | Finish: High Gloss | Coverage: 90 - 100 sq-ft/gal | Viscosity: 120 -125 | VOC Content: <100 g/L | Applicable Materials: Nylon | Specific Gravity: 1.02
Videos:
https://www.youtube.com/watch?time_continue=7&v=ynh7vWkKCo0
