Description
A penetrating, hard-drying, low-sheen oil finish, designed for sealing and finishing interior and exterior woods, especially teak on boats. It will not chip, crack, peel or blister when properly applied and maintained, thus reducing maintenance by eliminating scraping, sanding and refinishing. May be applied while vessel is underway to refurbish or touch-up worn or marred areas, and may be used as a maintenance and intermittent coat, giving existing varnished surfaces longer life. When used on teak or wood decks, provides a durable non-slip surface to repel and resist water.SeaFinTM Teak Oil, 1 pt Container, Clear Amber, 200 - 400 sq-ft/gal Coverage, 107 deg F Flash Point
Features:
* High quality, penetrating oil that dries to a low sheen to seal and protect interior and exterior woods from moisture and weathering
* It creates a durable non-slip surface to repel water and resist wear
* It reduces work and maintenance costs because it is easy to repair
* It will not chip, crack, blister or peel
* It is excellent for polishing and maintaining varnished finishes, or refurbishing and touching up worn surfaces Brightwork Doors, rails and furniture Wood surfaces exposed to moisture Polishing varnished surfaces Standard/Approvals: OSHA 4 CFR 372 Application: Interior/Exterior Use
Specifications:
Viscosity: 15 Seconds: (No 2 Zahn Cup) | Curing Time: 4 - 6 hr to Dry | Applicable Materials: Wood | Nominal Capacity: 1 pt | Odor/Scent: Petroleum Distillate | VOC Content: 550 g/L | Packing Type: Container | Flash Point: 107 deg F | Application Method: Brush, Spray or Rag | Coverage: 200 - 400 sq-ft/gal | Specific Gravity: 0.84 | Additives: Oil, Resin, Petroleum Solvent Mixture | Form: Liquid | Resists: Water and Wear | Color: Clear Amber
