Description
Safely seals and protects ceramic tile grout lines. Resists soiling, mildew and water penetration.
Features:
* Tile Guard® Penetrating Grout Sealer seals and protects grout against stains from water and oil-based liquids
* Penetrating below the surface, it provides stain protection while also allowing moisture to escape so it can be used 2 weeks after grouting
* Be sure grout is dry before sealing; wait 2 weeks after grouting to seal Ensure that surface is clean and dry; existing sealers and coatings should be removed prior to coating Surface temperature should be between 5°F and 8°F when sealer is applied
* Sealer should not have contact with any non-recommended surface; (if this happens and sealer dries to create a white film, scrub surface with water and a white nylon pad.) Not to be used on food preparation surfaces
* Apply 1 to 3 coats of Tile Guard® Penetrating Grout Sealer
* Wipe up excess sealer where pools remain
Specifications:
Color: Clear | Form: Liquid | Resists: Water, Co2 and Dry Chemical | pH Range: 11.85 pH | Specific Gravity: 1 | VOC Content: <0.1 g/L | Nominal Capacity: 22 oz | Coverage: 50 - 150 sq-ft | Size: 22 oz | Manufacturer: Homax Corp | Manufacturer Part Number: 9324 | Case Weight: 10.998 | General Information: Safely seals and protects ceramic tile grout lines. Resists soiling, mildew and water penetration.
